Inquiry Basket ( 0 )
Company Details
  • Henan Sanqiang Medical Equipment Liability Co.,Ltd

  •  [Henan,China]
  • Business Type:Manufacturer
  • Main Mark: Africa , Asia , Middle East
  • Exporter:61% - 70%
  • Certs:CE, ISO13485, ISO9001
  • Description:High Temperature Sterilizer Price,High Temperature Sterilizer Service,High Temperature Sterilizer Equipment
Henan Sanqiang Medical Equipment Liability Co.,Ltd

Henan Sanqiang Medical Equipment Liability Co.,Ltd

High Temperature Sterilizer Price,High Temperature Sterilizer Service,High Temperature Sterilizer Equipment

  • Title
  • All
Home > Products > Medical Sterilizer > Steam Sterilizer > High temperature sterilizer wholesale
Online Service

High temperature sterilizer wholesale

Share to:  
Product Description

High temperature sterilizer wholesale

High temperature sterilizer cabinet is that the cold air inside the sterilizing cabinet is drawn out by the vacuum pump through the flow of water to make it in a negative pressure state, and then the saturated hot steam is input so as to penetrate quickly into the interior of the article.3 or 4 times.Under the effect of high temperature and high pressure,microbial proteins are denatured,coagulated and inactivated to achieve sterilization requirements.After sterilization,vacuum is applied to rapidly dry the sterilized items.The workflow is computer-controlled, convenient,time-saving, labor-saving,short total sterilization time,thorough and reliable sterilization,Steam Sterilizer items drying,High temperature sterilizer is one of the indispensable instruments for sterilization and sterilization of hospital medical articles.

1,European Class B standards,in line with EN13060 safety test,with three pulsed vacuum drying function,vacuum degree up to-0.9bar(-0.09Mpa).The remaining humidity of the device is <0.2%.Applicable to all kinds of packaged,unpackaged,solid,Class A hollow,B hollow,B hollow porous and pipeline equipment inside the sterilization.
2.Full computer control, adopting advanced imported 16-bit microprocessor,easy to operate.It is suitable for disinfection and sterilization of instruments in dentistry ophthalmology,operating room,and laboratory.
3,with BD testing,vacuum testing procedures for steam penetration testing.
4.Jet steam generator ensures more uniform temperature and pressure in the pot and more complete disinfection.
5,with a water tank full of water alarm system,to avoid the possibility of circulating wastewater disinfection,disinfection makes more sense.
6,a clear LCD interface display,a complete fault detection and alarm system,allowing you to master the machine status at any time.
7,door interlock protection,pressure inside the chamber,the door can not be opened,use more secure.
8,new on-water tank design,cleaning more convenient
9,equipped with a built-in printer to record the disinfection process.
The reason why the vacuum pump continues to draw negative pressure does not drop:
1.The causes of the vacuum pump itself,such as the drop of kinetic energy of the vacuum pump,reverse rotation of the vacuum pump,etc.;
2,the total water pressure is too low, water pressure<0.1MPa/cm2;
3.The water flow rate is too small or the pipe diameter of the tap water pipe is too thin.
Countermeasures:For the objective reasons to give replacement parts,such as vacuum pumps,water pressure gauges,water pipes; sterilizer water pipe is preferably a separate pipe,and install a water flow meter beside the water gauge to observe the water pressure and water flow rate at any time,To avoid negative pressure drop due to too little water flow,dry pumping occurs in the vacuum pump and parts are damaged.
Under normal conditions,the sterilization process temperature reached 126°C.The temperature reaches 132°C for a duration of>4 minutes within 10 minutes.The reason is:
1,the total pressure of vapor source is lower than 0.3MPa/cm2;
2.Pressure relief valve is not sensitive to the pressure in the sterilizer cabinet<0.2MPa/cm2;
3.The packaging and discharge of sterilized items are not as required.For example,if the sterilized package volume is>30cm*30cm*50cm,the arrangement will not affect the steam penetration in the longitudinal direction.
4,steam moisture content,steam and water mix to reduce its latent heat,affect the penetration,leading to sterilization failure;
5.The surface temperature of articles to be consumed in winter is low and no preheating treatment is performed.
Countermeasures:The total steam source should be>0.4MPa/cm2,and preheat the contents of the sterilizer to fully eliminate the excess moisture in the condensate and steam.When the interlayer pressure reaches 0.1MPa/cm2,close the sandwich drain valve again,and wait for the interlayer pressure.When it reaches 0.2MPa/cm2,it will start to enter the disinfection and sterilization procedure.Reasonably adjust the pressure reducing valve so that the steam enters the sterilizing cabinet according to the required pressure to prevent superheat.The pressure gauge safety valve should be calibrated once a year.The problem should be replaced at any time.The trap should be kept unobstructed and the steam quality should be improved.In order to ensure that the input is a clean and qualified saturated vapor(ie 10% water mist,5% air),The input pipeline should be set up separately,and the distance should not be too long.The pipeline system should be wrapped with insulation material,and a filter should be attached to remove impurities and dirt from the steam.A steam separator should be set up to condense condensed water mist in the steam.The package size of the goods is appropriate, and it is arranged longitudinally.

High temperature sterilizer

Looking for ideal High Temperature Sterilizer Price Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the High Temperature Sterilizer Service are quality guaranteed. We are China Origin Factory of High Temperature Sterilizer Equipment. If you have any question, please feel free to contact us.

Product Categories : Medical Sterilizer > Steam Sterilizer

Email to this supplier
Other Products
Communicate with Supplier?Supplier
Jay Wong Mr. Jay Wong
What can I do for you?
Contact Supplier