Inquiry Basket ( 0 )
Company Details
  • Henan Sanqiang Medical Equipment Liability Co.,Ltd

  •  [Henan,China]
  • Business Type:Manufacturer
  • Main Mark: Africa , Asia , Middle East
  • Exporter:61% - 70%
  • Certs:CE, ISO13485, ISO9001
  • Description:Steam Sterilizers Sales,Steam Sterilizers Price,Steam Sterilizers Wholesale
Henan Sanqiang Medical Equipment Liability Co.,Ltd

Henan Sanqiang Medical Equipment Liability Co.,Ltd

Steam Sterilizers Sales

,Steam Sterilizers Price,Steam Sterilizers Wholesale

Title
  • Title
  • All
Home > Products > Medical Sterilizer > Steam Sterilizer > Steam sterilizers sales price
Online Service

Steam sterilizers sales price

Share to:  
Product Description

Steam sterilizers sales price


Henan Sanqiang Medical Devices Co.,Ltd.has taken the lead in starting steam sterilizerscompanies in Hua County,Henan Province in 2000.After years of development,the company now covers an area of over 54,000 square meters. With our professionalism and mature technology in the field of medical equipment,we have rapidly emerged in the medical field and are committed to research and innovation,based on the introduction of advanced German technology.Has successfully developed a series of low-temperature plasma hydrogen peroxide sterilizers,ethylene oxide sterilizers,dry heat sterilizers,hot and humid fast high-pressure steam sterilizers,three pre-vacuum pulsed steam autoclaves, Viewer storage cabinets, ultrasonic cleaners and related consumable materials.
Steam sterilizers is a rapid and reliable sterilization and sterilization equipment that uses pressure saturated steam to apply to items in medical and health services,scientific research,and agriculture.Sterilization and sterilization of medical devices,dressings,glassware,and solution culture media also apply to high-altitude drinking water in highland areas for cooking equipment and enterprises and institutions,as well as high-temperature steam source equipment.
Instructions
1.Stacking: Pack the drugs to be sterilized,and then place them on the sieve plate in the sterilizing barrel in order,and leave a proper gap between the package and the package to facilitate the overflow of cold air inside the sterilizing barrel.And the penetration of steam increases the sterilization effect.
2,add water:Add 4 liters of clean water in the sterilizer body,the water will gradually evaporate in the process of extinction,the water surface will be reduced accordingly.Therefore, before each sterilization,the amount of water should be filled into the body of the sterilizer to avoid dehydration of the heating tube and damage to the heating tube.
3.Sealing:Put the sterilizing barrel into the body of the sterilizer,insert the hose on the lid into the semicircular groove on the inner wall of the sterilizing barrel,and close the lid.The bolt groove on the cover is aligned with the main body bolt groove,and then the relative orientation of the wing nut is sequentially inserted into the groove to be evenly tightened,so that the cover and the main body are closely contacted.
4.Heating;Connect the sterilizer power plug to the power outlet.Turn the power switch to the"ON"position,the power Indicator light turns on,and the heating tube starts heating.Then place the bleeder valve plater to the [bleed" position.When the more urgent steam is ejected,the bleeder valve plater should be set to the[closed"position.At this point,the pressure gauge pointer slowly rotates clockwise,indicating that the pressure inside the sterilizer is gradually rising and the temperature increases.
5.Sterilization:When the pressure in the sterilizer reaches the required range,the user can start to calculate the sterilization time on his own.According to different items and packaging, refer to(Table 1)to determine the time required for sterilization.During the sterilization process,the user can adjust the heat source properly by turning on or off the power switch on the sterilizer,or connect a voltage regulator transformer and adjust the voltage appropriately to keep the pressure in the sterilizer steady. status.However, the pressure inside the sterilizer must not be lower than the user-selected value.If the user does not use the above method of controlling the heat source,the safety valve will intermittently discharge the overpressure steam intermittently during the sterilization process.At this time,the setting pressure inside the sterilizer is 0.165 MPa.
6.Drying: For items that need to be quickly dried after sterilization,such as medical instruments, dressings,and utensils, the steam in the sterilizer can be quickly discharged through the air release valve when the sterilization is completed, until the pressure gauge pointer returns to 0"scale,wait 1 to 2 minutes after the cover is opened. After opening the lid, continue heating for 10-15 minutes so that the remaining steam on the item evaporates.Then turn the power switch to the"OFF"position to stop heating.
7.Cooling For sterilization items such as liquids and other liquids,do not vent the steam inside the sterilizer through the air release valve after sterilization.This will prevent the liquid from boiling violently and cause dangerous accidents such as spillage or bottle breakage.Therefore,after the sterilization is finished, the power switch should be turned to the[OFF"position first,and the heating should be stopped until it cools,until the pressure gauge pointer returns to"0",and wait for a few minutes before placing it.The valve wrench is set to the "Pneumatic"position.Then you can open the lid.
8.The temperature and time required





Steam sterilizers

Looking for ideal Steam Sterilizers Sales Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Steam Sterilizers Price are quality guaranteed. We are China Origin Factory of Steam Sterilizers Wholesale. If you have any question, please feel free to contact us.

Product Categories : Medical Sterilizer > Steam Sterilizer

Email to this supplier
Other Products
Communicate with Supplier?Supplier
Jay Wong Mr. Jay Wong
What can I do for you?
Contact Supplier